Dumpsbuddy logo
An administrator enables the NFS protocol on an SVM and creates a volume to be used as a datastore in a VMware environment. After a rescan, the volume is not visible on the ESXi hosts.
What must the administrator validate to resolve this problem?
Which tool is available on a non-NetApp primary system to assist in starting or stopping SnapVault, modifying NDMP settings, enabling debugging, and capturing trace files?
In a fabric-attached MetroCluster, hardware disk ownership by a node is determined by which two factors (Choose two.)
Which two configurations ensure end users are able to restore previous versions of files? (Choose two.)
Which two choices are used to configure a semi-synchronous SnapMirror relationship? (Choose two.)
Which one of the following commands would you use to rejoin the "mil" volume with the "mir(l)" volume?
What is the maximum number of disk shelves per loop in a fabric-attached MetroCluster?
One method of configuring an interface for takeover is to enter ifconfig interface partner address at the command line. To make tins configuration persistent across reboots, you must enter tins information in the_____file for each appliance.
Refer to the exhibit.
An administrator creates a new qtree and an associated export policy. When the client tries to connect, they are denied.
What should the administrator do?
An administrator Is troubleshooting failed cluster peering between three ONTAP clusters for cascaded SnapMirror replication. Cluster1 is peered to Cluster, cluster^ is peered to Cluster3.
Clusterl and Cluster3 do not have an available route to reach each other. Cluster2 can route to both Cluster1 and Cluster3 using dedicated and separate intercluster LIFs.
What ONTAP network component must be configured on Cluster2 to resolve this issue?
When using a Protection Manager policy to manage Open Systems SnapVault backups on a UNIX server, which three are valid objects to include in the data set? (Choose three.)
When using SAN protocols, what is the maximum number of nodes that can be added to a four node cluster?
The Snap Vault secondary system makes a snapshot of its own volume where the qtrees are located.
The snapvault snap create volume snapname command can be executed on the__________.
Which ONTAP feature combines multiple writes into a single 4K block on the aggregate?
The SnapVault secondary system allows you to keep a separate schedule of Snapshot copies from your primary system.
What would allow for an automatic switchover of an SM-BC relationship in case of a site disaster7
To remove a cluster setup, you must perform the following steps.
1. Type cf disable.
2. Unlicense cluster.
3. Remove partner entries for network interfaces from the /etc/rc file.
4. Halt and make sine the partner-sysid is blank.
5. Power down and remove the cluster interconnect card.
6. Perform steps 1-5 above on the partner node.
When cabling a standard storage appliance for SyncMirror. disk pool 1 volumes must be cabled to Fibre Channel adapter(s) located in what range of slots on the FAS960 appliance?
A mirrored volume. volX. is composed of twelve 36-Gigabyre disks: six in volX/plex0. six in volX/plex1. A drive fails in plexl. bur pool 1 contains only 72-Gigabyte spare disks. Data ONTAP will do which of the following?
You are troubleshooting a clustered failover problem at a customer site. The customer explains that both storage appliances were NFS mounted onto the Solaris host. You attempt to create a file on the NFS mount point for the inaccessible appliance, but you get the following error:NFS server filer2 not responding still trying.Symptoms:
1) When not in takeover mode, both storage appliances operate normally.
2) In takeover mode, the taken over node is not accessible on the network.You perform a "cf giveback" and you can now create a file over NFS on both appliances.
What should vou do first to resolve this issue?
When configuring SyncMirror disk pools, which platforms require disks connected to particular ports and/or FC adapters on particular ports?
Which one of the following commands is used to specify the destination appliance(s) that are allowed to replicate (pul data from the source appliance?
When creating an S3 bucket using System Manager, ONTAP uses which default performance service level for an AFF?
Which one of the following commands or procedures would you use to undo a SnapRestore reversion?
Which command disables client access to Snapshot copies on a volume called flexvol1?
Which option of the snap restore command allows you to specify a different directory, as long as the directory already exists?
What NetApp tool includes Crafana dashboards to display ONTAP performance, capacity and hardware metrics?
After an unexpected ONTAP node reboot, an administrator notices that the NAS data LIFs are not on their home port.
Which UF configuration would modify this behavior?
Due to the sensitive nature of AutoSupport messages, what transport protocol should a storage administrator configure?
Which one of the following SyncMirror commands would you use to mirror an existing unmirrored volume where Data ONTAP selects the disk drives?
Which MetroCluster configuration procedure is recommended for re-establishing a mirrored volume that was in a level-0 re synchronization state when it failed?
You want to create an automated test environment that performs a single file SnapRestore. Every time you run the procedure, however, SnapRestore prompts you to confirm your decision to revert the file. How can you automate this step?
You can avoid data corruption when you issue the cf forcetakeover-d command if the remote node is
Which SyncMirror command mirrors an existing unmirrored aggregate where Data ONTAP selects the disk drives?
Fill in the blanks for the following statement:
The qtree specified for_____must not exist on the secondary system before you run the_____command.
TESTED 05 Oct 2025
