Hit the Books & Save Big: Black Friday 75% Off! Use coupon code below on all exam bundles! - Ends in 0d 00h 00m 00s - Coupon code: budy75

300-120 Implementing Cisco Wireless Advanced Solutions (300-120 WLSI) v1.2 Questions and Answers

Questions 4

Exhibit:

300-120 Question 4

Refer to the exhibit.

A wireless network engineer has been tasked with implementing AVC in a FlexConnect locally switched network. The AVC feature is properly configured for the WLAN named WLSI-AAA and the policy profile f2602. However, the AVC statistics are not displayed for this WLAN.

Which configuration change should be implemented to display the AVC statistics for this WLAN?

Options:

A.

Configure policy profile C2602 to use a different AVC policy.

B.

Configure policy profile f2602 to use a different flow monitor.

C.

Configure policy profile C2602 to use local switching for client data.

D.

Configure policy profile f2602 to use the same interface as C2602.

Buy Now
Questions 5

A customer uses a Cisco Catalyst 9800 Series Wireless Controller and Cisco 802.11axAPs. The management has requested the ability to see what type of devices are on the wireless network. Which two types of local device profiling must be used? (Choose two)

Options:

A.

Ip address

B.

wireless supplicant

C.

RADIOUS

D.

DHCP

E.

MAC Address OUI

Buy Now
Questions 6

A wireless controller has a RADIUS server configured globally. Another RADIUS server is mapped for WLAN A in this controller. Which RADIUS server does the controller use for authenticating clients from WLAN A?

Options:

A.

RADIUS server that is globally configured

B.

first the RADIUS server that is mapped for WLAN A, and if authentication fails, it reverts to the RADIUS server that is globally configured

C.

RADIUS server that is mapped for WLAN A

D.

first the RADIUS server that is globally configured, and if authentication fails, it reverts to the RADIUS server that is mapped for WLAN A

Buy Now
Questions 7

Refer to the exhibit.

A network architect configured the Cisco Catalyst 9800 Series Controller to find out information on client types in the wireless network. RADIUS profiling is enabled so that the controller forwards the information about clients to a Cisco ISE server through vendor-specific RADIUS attributes. The ISE server is not profiling any data from the controller. Which configuration must be added in the blank in the code to accomplish the profiling on the Cisco 9800 Series controller?

300-120 Question 7

Options:

A.

aaa accounting identity acct_method start-stop group rad-group

B.

aaa accounting network acct_method start-stop group rad-group

C.

aaa accounting exec acct_method start-stop group rad-group

D.

aaa accounting commands acct_method start-stop group rad-group

Buy Now
Questions 8

An organization is supporting remote workers in different locations. In order to provide wireless network connectivity and services, OfficeExtend has been implemented. The wireless connectivity is working, but users report losing connectivity to their local network printers. Which solution must be used to address this issue?

Options:

A.

OEAP gateway override

B.

OEAP split tunnel

C.

WLAN static IP tunneling

D.

FlexConnect local switching

Buy Now
Questions 9

A network engineer wants to implement QoS across the network that supports multiple VLANs. All the APs are connected to switch ports and are configured in local mode. Which trust model must be configured on the switch ports to which the APs are connected?

Options:

A.

CoS

B.

WMM UP

C.

DSCP

D.

IPP

Buy Now
Questions 10

An engineer needs to provision certificates on a Cisco Catalyst 9800 Series Wireless Controller. The customer uses a third-party CA server. Which protocol must be used between the controller and CA server to request and install certificates?

Options:

A.

SCEP

B.

TLS

C.

LDAP

D.

SSL

Buy Now
Questions 11

An engineer has configured the wireless controller to authenticate clients on the employee SSID against Microsoft Active Directory using PEAP authentication.

Which protocol does the controller use to communicate with the authentication server?

Options:

A.

EAP

B.

802.1X

C.

RADIUS

D.

WPA2

Buy Now
Questions 12

A customer has Cisco FlexConnect APs at all remote branches and requires zero downtime through the FlexConnect Fault Tolerance feature. Which two configurations must be identical on both controllers to maintain connectivity when the APs switch from the primary WLC to the backup WLC because of a WAN failure? (Choose two.)

Options:

A.

AAA server ordering

B.

mobility domain

C.

interface configuration

D.

WLAN ordering

E.

AP join profile

Buy Now
Questions 13

Refer to the exhibit.

Which COS to DSCP map must be modified to ensure that voice traffic is tagged correctly as it traverses the network?

300-120 Question 13

Options:

A.

COS of 6 to DSCP 46

B.

COS of 3 to DSCP 26

C.

COS of 7 to DSCP 48

D.

COS of 5 to DSCP 46

Buy Now
Questions 14

A corporation has a wireless network in which all APs are configured in FlexConnect mode. The WLC has a data WLAN and a VoWiFi WLAN, and both SSIDs are centrally switched. Which QoS configuration must be implemented so that wireless packets maintain their markings across the wired and wireless networks?

Options:

A.

Trust DSCP.

B.

Enable CAC.

C.

Create a QoS policy.

D.

Allow WMM.

Buy Now
Questions 15

A retail chain is deploying a wireless network across multiple branch stores using Cisco Catalyst 9800 Series controllers and access points in FlexConnect mode. The employee WLAN uses WPA2-PSK and must remain available during WAN outages while still being centrally managed when WAN connectivity is available.

Which two actions should the network administrator implement to support this design? (Choose two.)

Options:

A.

Centralize all authentication at the controller and rely on cached credentials at the APs during outages.

B.

Configure the controller to centrally switch the employee WLAN traffic at all times.

C.

Install a local RADIUS server at each branch to authenticate WPA2-PSK users.

D.

Group the FlexConnect APs by branch in a FlexConnect group so branch-specific settings can be applied.

E.

Configure the FlexConnect APs to locally switch the employee WLAN traffic.

Buy Now
Questions 16

To reduce overhead, an engineer wants to send one copy of each update to all members of a mobility group. Which feature must be configured on the WLC to accomplish this task?

Options:

A.

Unicast

B.

Multicast

C.

IGMP

D.

UDLD

Buy Now
Questions 17

Refer to the exhibit. A network administrator must automate notifications for Security Advisories Data reports on the Cisco Catalyst Center v2.3.7 using the Report notification feature. Preferring a programmable approach over UI/CLI, the administrator decides to create a webhook via the Cisco DNA Center API to send real-time HTTP notifications to an external application. The webhook URL https://example.com/webhook uses HTTPS with a self-signed certificate, which requires a specific configuration in the payload to ensure the webhook functions correctly. Which code snippet must be placed onto the box in the code to complete the Python script that configures the webhook to use the self-signed certificate to extract the Security Advisories Data report?

300-120 Question 17

Options:

A.

Option A

B.

Option B

C.

Option C

D.

Option D

Buy Now
Questions 18

An engineer must use Cisco AVC on a Cisco WLC to prioritize Cisco IP cameras that use the wireless network. Which element do you configure in a rule?

Options:

A.

permit-ACL

B.

WMM required

C.

mark

D.

rate-limit

Buy Now
Questions 19

A corporation has a wireless network in which all APs are configured in FlexConnect mode. The WLC has a data WLAN and a VoWiFi WLAN, and both SSIDs are centrally switched. Which QoS configuration must be implemented so that wireless packets maintain their markings across the wired and wireless networks?

Options:

A.

IPP

B.

CoS

C.

DSCP

D.

WMM UP

Buy Now
Questions 20

An engineer configured a single WLAN with WPA2-Enterprise and wants to use Cisco ISE to apply AVC profiles to users in different departments. After users successfully authenticate to the wireless network, each department is placed in a unique VLAN and assigned an AVC profile. Which feature must be enabled on the Cisco WLC?

Options:

A.

Role-based access control

B.

Change of Authorization

C.

Local Profiling

D.

AAA Override

Buy Now
Questions 21

An engineer is planning an image upgrade of the WLC, and hundreds of APs are spread across remote sites with limited WAN bandwidth. The engineer must minimize the WAN utilization for this upgrade. Which approach must be used for the AP image upgrade?

Options:

A.

Predownload the new code to the APs.

B.

Use the Smart AP image upgrade feature.

C.

Allow the APs to download their code after WLC reboot.

D.

Execute parallel TFTP code upgrade on the APs via SSH.

Buy Now
Questions 22

A network engineer created a new wireless network that will be used for guest access. The corporate network must utilize all rates. The guest network must use only lower rates instead of 802.11n data rates. To what must the WMM policy of the WLAN be set to accomplish this task?

Options:

A.

required

B.

allowed

C.

disabled

D.

mandatory

Buy Now
Questions 23

On a Cisco Catalyst 9800 Series Wireless Controller, an engineer wants to prevent a FlexConnect AP from allowing wireless clients to connect when its Ethernet connection is nonoperational. Which command set prevents this connection?

Options:

A.

config terminal

wireless flexconnect profile [profile name]

ethernet-fallback-enable

end

B.

config terminal

wireless flexconnect profile [profile name]

fallback-radio-shut

end

C.

config terminal

wireless profile flex [profile name]

fallback-radio-shut

end

D.

config terminal

wireless profile flex [profile name]

ethernet-fallback-enable

end

Buy Now
Questions 24

An engineer must implement a CPU ACL that blocks web management traffic to the controller, but they also must allow guests to reach a Web Authentication Redirect page. To which IP address is guest client HTTPS traffic allowed for this to work?

Options:

A.

DNS server IP

B.

controller management IP

C.

virtual interface IP

D.

client interface IP

Buy Now
Questions 25

What two actions must be taken by an engineer configuring wireless Identity-Based Networking for a WLAN to enable VLAN tagging? (Choose two.)

Options:

A.

enable AAA override on the WLAN

B.

create and apply the appropriate ACL to the WLAN

C.

update the RADIUS server attributes for tunnel type 64, medium type 65, and tunnel private group type 81

D.

configure RADIUS server with WLAN subnet and VLAN ID E. enable VLAN Select on the wireless LAN controller and the WLAN

Buy Now
Questions 26

An employee with administrative privileges has a Cisco OEAP at home. The employee must add an SSID for personal devices.

Which two actions enable the employee to access the AP configuration? (Choose two.)

Options:

A.

Connect to the OEAP IP address through SSH.

B.

Obtain the IP address of the OEAP from a sticker on the device.

C.

Enter the OEAP IP address in a web browser.

D.

Obtain the OEAP IP address from the employee’s home router.

E.

Connect to the preconfigured SSID and obtain the IP address of the AP from the welcome page.

Buy Now
Questions 27

Refer to the exhibit. A network administrator must migrate a Cisco Catalyst 9800 WLC from local client profiling to RADIUS profiling through Cisco ISE. The engineer must enable RADIUS CoA based on detecting the client type as Windows to update the access policy based on profile detection immediately. Which CoA type configuration must the engineer apply on Cisco ISE?

300-120 Question 27

Options:

A.

no CoA

B.

reauth

C.

port

D.

bounce

E.

preauth

Buy Now
Questions 28

Refer to the exhibit.

The security team has implemented ISE as an AAA solution for the wireless network. The wireless engineer notices that though clients are able to authenticate successfully, the ISE policies that are designed to place them on different interfaces are not working. Which configuration must be applied in the RADIUS Authentication Settings section from the ISE Network Device page?

300-120 Question 28

Options:

A.

Disable KeyWrap.

B.

Use ASCII for the key input format.

C.

Change the CoA Port.

D.

Correct the shared secret.

Buy Now
Questions 29

An engineer completes the setup of a two-node Cisco ISE deployment for a guest portal. When testing the portal, the engineer notices that sometimes there is a certificate CN mismatch. Which certificate type helps resolve this issue?

Options:

A.

Public-Signed Root

B.

Public-Signed SAN

C.

Self-Signed Wildcard

D.

Self-Signed Standard

Buy Now
Questions 30

An engineer configures custom QoS mapping on a Cisco Catalyst 9800 Series Wireless Controller. The engineer uses the Cisco-recommended configuration for DSCP-to-UP mapping. Which two wired-to-wireless QoS mappings should be configured? (Choose two.)

Options:

A.

DSCP CS4 to 802.11e UP 4

B.

DSCP EF to 802.11e UP 7

C.

DSCP CS3 to 802.11e UP 3

D.

DSCP EF to 802.11e UP 6

E.

DSCP CS4 to 802.11e UP 5

Buy Now
Questions 31

What must be configured on ISE version 2.1 BYOD when using Single SSID?

Options:

A.

open authentication

B.

802.1x

C.

no authentication

D.

WPA2

Buy Now
Exam Code: 300-120
Exam Name: Implementing Cisco Wireless Advanced Solutions (300-120 WLSI) v1.2
Last Update: Nov 17, 2026
Questions: 105

PDF + Testing Engine

$149.99

Testing Engine

$114.99

PDF (Q&A)

$99.99