Dumpsbuddy logo
A system administrator is performing the BIOS/Platform configuration of a DL380 Gen10 servers You notice the amber health LED.
The health status of which solution components can be verified with embedded UEFI Diagnostics? {Select two.)
A customer has two HPE ProLiant Gen10 servers. They both require firmware installation.
Which HPE tool should you recommend to performing this task?
A customer needs a server memory subsystem that meets the following requirements:
Which HPE memory feature meets the customer needs?
An HPE customer wants to perform is simplified update of firmware and drivers among their 100 HPE Gen9 and Gen10 racked servers.
Which HPE software tool should the customer use to minimize the time required to perform this activity.
A customer needs a solution for a rack of servers. They need connectivity for 14 HPE DL380 servers, which each have two 10-GBASE-T Ethernet ports, and 10 HPE DL360 servers, which have two 10GBASE-X SFP+ Ethernet ports.
They need switch redundancy for each server and want to connect all servers to the same switch stack. The client also needs a 400 Gb backbone connection to the data center core switch from the solution you are creating.
Which architecture meets the customer requirements?
You are installing an HPE Nimble HF20 into a customer’s existing rack.
Prior to installation, what should you consider?
Refer to the exhibit.
When performing a code upgrade on an HPE Nimble array, you noticed a connection failure on ESX1. Refer to the exhibit showing the complete zoning configuration of one of the HPE SN3000B switches.
What should you do to ensure storage access is not interrupted when doing the next update?
A solution integrator is installing new equipment to the rack.
Click the recommended location for HPE R/T3000 Extended Runtime Module.
Hot Area:
Read the question, and then refer to the exhibit.
An administrator connected a hypervisor to interface Ten-Gigabit Ethernet1/0/1 in a switch. The administrator created virtual machines in VLAN 10 and 20 on the hypervisor. These VLANs are configured to be tagged on the hypervisor.
The administrator found that all the virtual machines within VLAN 20 can communicate with each other, but not to any resource on VLAN 20 outside the hypervisor.
What must you do to resolve this issue?
Exhibit:
Which HPE ProLiant Server meets the customer's requirements?
Which HPE ProLiant Server meets the customer's requirements?
Refer to the exhibit.
Drag the correct protocols from the left to the appropriate area on the topology on the right.
You are installing a combined server and storage solution at a customer location. What must you keep in mind regarding the typical requirements for the location? (Choose two.)
A customer needs to virtualize their storage across physical servers and storage environments.
Which HPE solution meets the customer’s needs?
A server administrator needs to see the 24-hour history of the power consumed by an installed HPE ProLiant server.
Which HPE tool can the admin use to gather this information?
A customer is configuring their SAN.
Which types of data typically require block storage? (Choose two.)
A customer is planning an upgrade to their network. They need to combine multiple existing switches into one virtual device.
Which technology should the customer configure on their existing switches?
A customer is upgrading their network infrastructure to provide the best performance for IP storage.
Which technologies in a network switch meet the customer’s needs? (Choose three.)
You need to install 10 HPE ProLiant servers in an environment without DHCP.
Which tool can you use to set up remote management?
A customer needs to increase the availability and bandwidth of network connectivity to their servers.
Which switch feature meets the customer’s needs?
You are designing a system for a customer that has a contract with a government agency. The contract requires the highest level of security algorithms possible.
Which HPE ProLiant Gen10 feature set will address this customer’s needs?
You are provisioning a new virtual disk group on a MSA storage system.
Which disk group parameters must you specify when creating the vdisk? (Choose three.)
What is the most important difference between an HPE ProLiant DL380 Gen10 server and an HPE ProLiant DL385 Gen10 server?
A customer has a single HPE ProLiant Gen 10 server.
Which embedded management tool should they use to monitor the server?
A customer ordered a pair of HPE SN3000B 16 Gb Fibre Channel Switches to provide Fibre Channel connectivity between VMware ESXi hosts and HPE 3PAR StoreServ 8200.
Which adapter i s required to support Fibre Channel connectivity from the VMware ESXi hosts to the new switches?
A customer needs to create a large RAID set for archive storage on large-capacity drives.
Which RAID level is recommended for this customer?
You are designing a network for a customer that needs a centrally-managed solution for their physical and virtual switches. This product must integrate with their existing third-party networking equipment.
Which HPE management solution meets the customer’s needs?
Which two HPE applications are installed on Windows operating systems with intelligent Provisioning? (Choose two.)
You are configuring a FlexFabric switch for a customer environment. The customer has requested specific SFP+ transceivers, power options, and cables.
Which HPE tool enables you to select and configure a switch according to precise specifications?
A customer has a small branch office that requires a tower-based server solution. The customer runs office-based applications and wants lights-out management capability.
Which HPE server family meets the customer’s needs?
A customer Just purchased a ProLiant DL380 Gen 10 and wants to learn more about HPE Intelligent Provisioning features. Which task can the customer complete using HPE Intelligent Provisioning?
You are troubleshooting HPE ProLiant servers for a customer. The customer has granted you read-only access to HPE OneView. You need to download the audit log from OneView.
Which permission level should the customer give you?
A customer is considering an HPE ProLiant DL380 Gen10 server for their data center. The customer runs a large Oracle database. They need to increase performance and reduce their licensing costs.
Which feature of HPE Gen10 servers offers these benefits?
You are creating an internal array on an HPE ProLiant server.
What can you do to maximize the storage space efficiency?
You need to update the firmware on an MSL2024.
Which HPE utility do you need to use?
You are troubleshooting a customer’s HPE ProLiant rack-mount server. The customer has configured the server in Legacy Boot BIOS Mode and is trying to boot from a USB 3.0 drive. The server will not boot from the drive.
What should you do?
A customer is building out their rack of servers and storage systems. They need a high-performance network with a simple centralized management capability and deep buffer support for iSCSI. They expect high growth in their virtualization environment.
Which solution will best meet the customer’s needs?
TESTED 24 Apr 2024
