H35-651 HCIP-5G-Core Questions and Answers
The UPCF is a unified, open policy-control center for 5G networks. It uses an industry-leading cloud-native architecture, conforms to 3GPP specifications, and supports 5G SA and NSA access.
Options:
TRUE
FALSE
Answer:
AExplanation:
Exact Extract — Network Function Modularity
“Modularized network functions facilitate function decoupling and integration. Decoupled network functions are abstracted as network services, which can be independently expanded, evolved, and deployed on demand.”
— Huawei Training Material, SBA Network Architecture, page 93.
Technical Deep Dive
Huawei Unified Policy Control Function (UPCF) provides converged policy control for mobile communication networks. It combines capabilities required for traditional EPC policy control and the service-based policy-control architecture of 5G.
In a 5G SA network, the PCF participates in the 5G core architecture and provides policy decisions to network functions such as the SMF and AMF. Relevant reference points include N7 between PCF and SMF for session policy control, N15 between PCF and AMF for access and mobility policy control, and N5 between PCF and AF for application-related policy control.
The UPCF can also support EPC-era policy interfaces, including Gx and Rx, which are relevant to deployments involving LTE and 5G NSA connectivity. Cloud-native implementation allows policy-control components to be deployed and managed using virtualized or container-based infrastructure, depending on the product release.
The architectural advantages include independent component scaling, improved resource utilization, flexible deployment, and fault isolation. In NSA Option 3 deployments, the EPC remains central to service control, so legacy policy interfaces remain important. In SA deployments, service-based PCF interfaces support the corresponding 5G policy framework.
The statement is therefore TRUE. The exact container architecture and supported interfaces must still be checked against the applicable UPCF software release rather than assumed to be identical across all releases.
The HTTP Routing Loop Prevention function allows the SCP to determine whether the Via header field in a received message contains the local FQDN. This assists in preventing HTTP routing loops.
Options:
TRUE
FALSE
Answer:
AExplanation:
Exact Extract — Service-Based Architecture
“All network functions on the control plane interact with each other through service-based interfaces. A service can be invoked by multiple network functions, reducing the coupling degree defined for interfaces between network functions.”
— Huawei Training Material, SBA Network Architecture, page 93.
Technical Deep Dive
The Service Communication Proxy (SCP) supports routing and forwarding of service-based communication between 5G network functions. In large 5G core deployments, a signalling request may pass through multiple SCP instances before reaching its destination NF.
Incorrect route configuration, service discovery results, or forwarding policies can cause requests to circulate repeatedly between proxy instances. HTTP provides the Via header field to identify intermediary systems through which a request has travelled.
For example:
Via: 2 scp-a.operator.example
Via: 2 scp-a.operator.example, 2 scp-b.operator.example
If an SCP receives a message whose Via information identifies that same SCP in the forwarding path, the message may have returned to a previously visited proxy. The SCP can use this information to detect potential HTTP signalling loops and prevent further forwarding.
The exact matching procedure depends on the SCP implementation, but the principle is to identify repeated forwarding through the same intermediary. This provides protection against unnecessary signalling traffic, repeated processing, network congestion, and signalling resource exhaustion.
In operational troubleshooting, engineers should examine the received Via field, destination URI, SCP forwarding policies, NF discovery results, and any routing-loop alarms. Therefore, the statement is TRUE.
In UDM 21.0, which of these commands configures 5G-AKA authentication for subscribers?
Options:
ADD SUB
ADD AMDATA
MOD AMDATA
ADD KI
Answer:
DExplanation:
Exact Extract — Security Architecture
“The core network is responsible for: Providing user connections; Mobility management and session management; User authentication; Charging management; Providing interfaces for connecting to external networks.”
— Huawei Training Material, Position and Main Functions of the Core Network, page 88.
Technical Deep Dive
The correct command is ADD KI , which provisions authentication-key information associated with a subscriber. 5G Authentication and Key Agreement (5G-AKA) provides mutual authentication between the UE and the serving network through coordinated interactions involving the AUSF, UDM/ARPF, AMF/SEAF, and subscriber USIM.
The long-term subscriber authentication key, commonly denoted K, forms the cryptographic foundation of the authentication process. Associated parameters can include the authentication algorithm, operator configuration, and sequence-number information.
A representative Huawei subscriber authentication-key command uses the following structure:
ADD KI: IMSI="001010123456789", CARDTYPE=USIM, ALG=MILENAGE, ...;
The omitted fields contain sensitive authentication-key parameters and depend on the product release and security configuration. Authentication keys should never be exposed in operational logs or training examples.
The command distinctions are: ADD SUB creates subscriber identity information; ADD AMDATA provisions access and mobility subscription data; MOD AMDATA modifies existing access and mobility subscription data; and ADD KI provisions subscriber authentication-key information.
Huawei's UDM MML command reference defines ADD KI as the command for adding or modifying an individual subscriber authentication key, including algorithm-related parameters. Authentication data is subsequently used by the UDM/ARPF to support 5G-AKA vector generation, with the resulting authentication information exchanged through the standardized authentication services. Therefore, D is correct.
Which message does the AMF use to retrieve network slice subscription data from the UDM during initial 5G registration?
Options:
Nudm_SDM_Get
Nudm_SDM_Subscribe
Nudm_UECM_Registration
Nudm_SDM_Info
Answer:
AExplanation:
Exact Extract
“All network functions on the control plane interact with each other through service-based interfaces. A service can be invoked by multiple network functions, reducing the coupling degree defined for interfaces between network functions.”
— Huawei Training Material, SBA Network Architecture, page 93.
Technical Deep Dive
During initial 5G registration, the AMF retrieves subscriber information from the UDM to determine the services and network slices authorized for the UE. The Nudm_SDM_Get service operation is used to obtain subscription information.
Network slice subscription data identifies the S-NSSAIs that the subscriber is authorized to use. The subscription information may also include the default subscribed S-NSSAIs that are relevant to network slice selection.
A representative HTTP request is GET /nudm-sdm/v2/{supi}/nssai . The exact API version depends on the applicable 3GPP release.
The AMF uses the subscription information together with the Requested NSSAI, local configuration, and applicable NSSF selection results to determine the Allowed NSSAI.
Why the other options are incorrect: Nudm_SDM_Subscribe establishes a subscription for notifications about changes to subscriber data. It is not the primary operation for initially retrieving that data. Nudm_UECM_Registration registers the serving AMF with the UDM for UE context management. Nudm_SDM_Info is not the appropriate retrieval operation for this procedure.
This separation between data retrieval, subscription notification, and UE context registration is fundamental to the 5G service-based architecture. Operational troubleshooting should verify the SUPI, UDM resource URI, HTTP response status, provisioned S-NSSAIs, and AMF slice-selection configuration. Therefore, A is correct.
In UNC 21.0, which command adds conditions for the target NF that is to be subscribed to?
Options:
ADD SUBCONDITION
ADD NFPROFILE
ADD NRF
ADD NRFPARA
Answer:
AExplanation:
Exact Extract
“Modularized network functions facilitate function decoupling and integration. Decoupled network functions are abstracted as network services, which can be independently expanded, evolved, and deployed on demand.”
— Huawei 5G Training Material, SBA Network Architecture, page 93.
Technical Deep Dive
The intended Huawei UNC command is ADD SUBCONDITION . The Network Repository Function supports NF registration, discovery, and status subscription services. A network function can subscribe to notifications concerning other NF instances that meet specified criteria.
For example, an SMF may need to track the availability of a particular type of PCF instance. Rather than repeatedly polling the NRF, the subscribing NF can establish a notification subscription with selection criteria. These criteria may include NF type, NF instance identifier, service information, or other supported profile attributes.
ADD SUBCONDITION defines the subscription conditions used to identify target NFs. When a registered NF matching the configured conditions changes its operational status or registration information, the NRF can issue a notification to the relevant subscriber.
This mechanism improves service discovery efficiency and helps control-plane functions react to changes in network function availability.
ADD NFPROFILE concerns NF profile configuration rather than the specific subscription condition. ADD NRF relates to NRF configuration. ADD NRFPARA relates to NRF parameters.
3GPP TS 29.510 defines the NRF NF status subscription service and associated subscription conditions. In Huawei deployments, this configuration must be consistent with the subscribing NF's notification endpoint and permitted NF selection criteria. Therefore, A is correct.
Which of the following statements concerning a SUCI is incorrect?
Options:
A SUCI is a temporary identifier used to hide a SUPI.
The AMF/SEAF supports SUCI-based authentication.
A SUCI is generated by a UE (USIM or ME) and decoded by the UDM/SIDF.
The Routing Indicator in a SUCI can be used to address the AUSF, UDM, and PCF.
Answer:
DExplanation:
Exact Extract — 5G Security Terminology
“IMSI: International Mobile Subscriber Identity; TMSI: Temporary Mobile Subscriber Identity; SUCI: Subscription Concealed Identifier.”
— Huawei Training Material, 5G Network Security Terminology.
Technical Deep Dive
The Subscription Concealed Identifier (SUCI) protects the permanent subscriber identity when identification information is exchanged over the access network. The Subscription Permanent Identifier (SUPI) uniquely identifies a subscriber within the relevant 5G subscription domain. SUCI contains identification and protection information that allows the home network to recover the concealed subscriber identity.
Its principal fields can include SUPI type, Home Network Identifier, Routing Indicator, Protection Scheme Identifier, Home Network Public Key Identifier, and Scheme Output.
A. SUCI protects the SUPI: The UE generates a SUCI using the applicable protection scheme. Unlike a conventional temporary identity such as the 5G-GUTI, the SUCI is a concealed representation associated with the SUPI.
B. Authentication using SUCI: The AMF/SEAF can initiate authentication using the SUCI. The authentication procedure involves the AUSF and UDM.
C. Generation and de-concealment: The SUCI is generated by the UE, with processing performed by the USIM or mobile equipment according to the supported protection arrangement. The UDM's Subscription Identifier De-concealing Function (SIDF) recovers the SUPI.
D. Routing Indicator: The Routing Indicator assists with selecting an appropriate AUSF or UDM instance. It is not defined as a general mechanism for addressing the PCF. 3GPP TS 23.003 explicitly identifies AUSF and UDM instance routing as a purpose of the SUCI Routing Indicator.
Therefore, D is incorrect. Terminology qualification: Option A uses the word temporary imprecisely. SUCI is a concealed subscriber identifier, not a temporary identity of the same kind as a 5G-GUTI. D remains the clearest intended incorrect statement.
Which of the following describe characteristics of multi-access edge computing (MEC)?
Select All that Apply
Options:
Applications and content are deployed at the network edge close to end users.
MEC maintains close proximity with end users to provide services.
MEC yields an ultimate service experience by keeping data processing close to end users.
MEC leverages the control and user plane separation (CUPS) architecture, and deploys the user plane closer to end users.
Answer:
A, B, C, DExplanation:
Exact Extract — Multi-access Edge Computing
“In terms of network construction, edge computing integrates traditional wireless networks with services. Multi-access Edge Computing (MEC) is deployed in the central equipment room of an enterprise or the equipment room of an edge radio base station, which is located in the edge data center (DC). The MEC terminates services by steering and processing traffic locally. It also hosts third party apps to provide tailored and differentiated services to enterprise customers, and agile, smart, tailored service to end users in real time.”
— Huawei Training Material, Multi-access Edge Computing, page 26.
Technical Deep Dive
Multi-access Edge Computing distributes application processing and computing resources closer to network users. The primary objective is to reduce the distance travelled by user traffic and improve the responsiveness of latency-sensitive applications.
A and B — Edge proximity: MEC platforms are deployed at edge locations such as enterprise data centres, metropolitan aggregation facilities, or other sites close to radio access networks. Hosting applications closer to users reduces the need for all traffic to traverse distant centralized data centres.
C — Improved user experience: Local processing can reduce transport latency, decrease backbone bandwidth consumption, and improve application responsiveness. However, the actual improvement depends on the complete service path, application design, radio conditions, and available computing resources.
D — CUPS-based deployment: Control and User Plane Separation allows the SMF and UPF to be deployed at different locations. The SMF may remain centralized while a UPF is deployed closer to users. The local UPF can steer eligible user traffic toward a nearby MEC application through the N6 interface.
A simplified path is UE → gNodeB → N3 → Edge UPF → N6 → MEC Application .
This architecture supports local traffic breakout, enterprise applications, and low-latency services. All four options describe valid MEC characteristics, although MEC and CUPS are distinct technologies and MEC does not inherently require every deployment to use the same UPF placement model.
Which of the following messages does the SMF use to provide the UPF with its assigned IP address during a UE-initiated PDU session establishment procedure?
Options:
PFCP Session Modification Request
PFCP Session Establishment Request
PFCP Session Report Request
PFCP Association Update Request
Answer:
BExplanation:
Exact Extract
“Session management; UE IP address allocation; User-plane function selection and control; UPF service control; QoS and policy execution; Downlink data arrival notification.”
— Huawei Training Material, Main Network Functions of the 5GC, page 95.
Technical Deep Dive
The PFCP Session Establishment Request is used by the SMF to establish a session context on the UPF through the N4 interface. During UE-initiated PDU session establishment, the SMF selects an appropriate UPF and programs the forwarding rules needed to process the subscriber's user-plane traffic.
Where the SMF allocates the UE IP address, that information can be delivered to the UPF in the PFCP Session Establishment Request.
Important PFCP information elements include CP F-SEID identifying the control-plane PFCP session, Create PDR defining packet detection rules, Create FAR defining packet forwarding actions, Create QER defining QoS enforcement rules, and UE IP Address identifying the subscriber address associated with applicable packet detection rules.
For example, the SMF can configure a PDR containing the UE IP address so that the UPF can identify packets belonging to the relevant subscriber session. The UPF responds with a PFCP Session Establishment Response, confirming the session establishment result.
The PFCP Session Modification Request is subsequently used when existing forwarding information must be changed, such as after the SMF receives the gNodeB's downlink tunnel endpoint information. A PFCP Session Report Request is generated by the UPF to report relevant events, while a PFCP Association Update Request manages association-level information.
The session establishment and modification procedures are specified in 3GPP TS 29.244. Therefore, B is correct.
Which statement below about 5G MM status is incorrect?
Options:
After an N2 context is established, the UE status is CM-CONNECTED on both the AMF and UE.
The CM status on the UE and AMF may be inconsistent.
After the UE receives the Registration Accept message, the UE status changes from RM-DEREGISTERED to RM-REGISTERED.
RM status and CM status are independent of each other.
Answer:
BExplanation:
Exact Extract — AMF Functionality
“The core network is responsible for: Providing user connections; Mobility management and session management; User authentication; Charging management; Providing interfaces for connecting to external networks.”
— Huawei Training Material, Position and Main Functions of the Core Network, page 88.
Technical Deep Dive
5G Mobility Management uses two state-management concepts. Registration Management (RM) describes whether the UE is registered with the network; the principal states are RM-DEREGISTERED and RM-REGISTERED . Connection Management (CM) describes the status of the NAS signalling connection between the UE and AMF; its principal states are CM-IDLE and CM-CONNECTED .
The RM and CM states represent different aspects of UE management. For example, a UE may be RM-REGISTERED while CM-IDLE. This means the subscriber remains registered but does not currently maintain an active NAS signalling connection.
During initial registration, the UE can establish a signalling connection before the registration procedure has completed. Therefore, RM-DEREGISTERED and CM-CONNECTED can temporarily coexist. When the UE receives a successful Registration Accept during initial registration, it enters RM-REGISTERED, consistent with Option C.
Why B is commonly selected in this examination: The intended examination interpretation is that the UE and AMF maintain corresponding CM states during normal, successfully coordinated connection-management procedures.
However, an important technical qualification is necessary. The UE detects release of its access-network signalling connection, whereas the AMF detects release of the corresponding N2 context. These events need not be observed at precisely the same instant. Temporary state discrepancies can therefore arise during failures or asynchronous release procedures.
Consequently, Option B is not universally false when interpreted literally. The examination's intended answer is B, but the question should be flagged as technically ambiguous because a transient inconsistency is possible.
If the AMF must release the signalling link toward the (R)AN after registration, which value is used in the Follow-on request IE?
Options:
0
1
2
3
Answer:
AExplanation:
Exact Extract
“Termination of uplink NAS signaling; NAS signaling security; AS security control; Signaling node for interoperability in 3GPP systems; Reachability management for UEs in idle mode; UE location area management; UE access authentication.”
— Huawei Training Material, Main Network Functions of the 5GC, AMF section, page 94.
Technical Deep Dive
The Follow-on Request (FOR) indicator is included in the 5GS registration type information element of the Registration Request message. It indicates whether the UE needs to maintain the NAS signalling connection after registration to perform additional signalling.
The relevant values are 0 = No follow-on request pending and 1 = Follow-on request pending .
When the indicator is set to 1 , the UE requests that the signalling connection remain available because further signalling is expected. For example, the UE may need to initiate an additional NAS procedure immediately after registration.
When the indicator is 0 , the UE indicates that no follow-on request is pending. If the AMF also has no downlink signalling or other reason to retain the connection, it may initiate release of the N2 UE context. This allows the UE to transition to CM-IDLE, reducing unnecessary signalling resources.
The important distinction is that a zero value does not independently force immediate release in every situation. The AMF also considers network-side signalling requirements.
3GPP TS 24.501 specifies that a pending follow-on request prevents immediate release of the NAS signalling connection after registration. Therefore, A is correct.
Which of the following statements are true regarding secondary authentication and authorization for a session?
Select All that Apply
Options:
The SMF can interact with the DN-AAA server through the UPF.
The SM PDU DN request container IE contains the DN-AAA server ID.
The DN-AAA server can assign IP addresses to UEs.
The SMF can interact with the DN-AAA server directly.
Answer:
A, C, DExplanation:
Exact Extract
“Session management; UE IP address allocation; User-plane function selection and control; UPF service control; QoS and policy execution; Downlink data arrival notification.”
— Huawei Training Material, Main Network Functions of the 5GC, SMF section, page 95.
Technical Deep Dive
Secondary authentication and authorization provides an additional authentication mechanism for accessing a particular Data Network (DN) after the UE has undergone primary 5G network authentication. This capability is especially useful for enterprise networks that require independent control of access to their applications and services.
A. SMF interaction through the UPF: The SMF can communicate with the Data Network Authentication, Authorization, and Accounting server (DN-AAA) through the UPF. In this architecture, the UPF transparently relays the necessary authentication and authorization messages.
C. DN-AAA IP address assignment: The DN-AAA server may supply an IP address or IPv6 prefix for the PDU session as part of its authorization response. This allows enterprise networks to retain control over subscriber address allocation when the appropriate procedures and policies are configured.
D. Direct interaction: If the DN-AAA server is reachable directly from the 5G core, the SMF may communicate with it without involving the UPF.
Why B is incorrect: The SM PDU DN Request Container carries data-network authentication information, including a possible DN-specific identity. This must not be confused with a mandatory DN-AAA server identifier. The SMF can determine the DN-AAA server using configuration or available identity information.
3GPP TS 23.502, Section 4.3.2.3, explicitly defines UPF-mediated and direct DN-AAA communication and permits the DN-AAA server to provide an IP address or IPv6 prefix. Therefore, A, C, and D are correct.
Which IE in the Registration Request message indicates the UE's capability to access a 4G network?
Options:
S1 UE network capability
Payload container
NAS message container
5GMM capability
Answer:
DExplanation:
Exact Extract
“As specified in the 3GPP specifications, there are two standards for 5G network architectures: standalone (SA) mode and non-standalone (NSA) mode. In NSA mode, eNodeBs and gNodeBs coexist on the radio access network (RAN), and the EPC or 5GC is used as the core network.”
— Huawei Training Material, 5G Networking Architecture, page 82.
Technical Deep Dive
The 5GMM capability information element carries capabilities related to the UE's operation in the 5G mobility-management framework. An important field is the S1 mode supported bit. This bit indicates whether the UE supports operation in the EPC NAS environment associated with LTE access.
The relevant values are S1 mode = 0: S1 mode not supported and S1 mode = 1: S1 mode supported .
When the UE supports the appropriate LTE/EPC functionality, this information assists the network with mobility and interworking decisions.
The distinction between options A and D is important. The S1 UE network capability IE provides more detailed EPC-related security and network capability information. However, the specific indication of whether S1 mode is supported is carried in the 5GMM capability IE.
The Payload Container and NAS Message Container serve different purposes. They transport information associated with NAS signalling and do not independently define the UE's 4G access support.
3GPP TS 24.501 defines the S1 mode support bit within the 5GMM capability information element. Therefore, D is correct.
Which of the following procedures are used in 5G session management?
Select All that Apply
Options:
PDU session update
PDU session release
Dedicated QoS flow activation
PDU session establishment
Answer:
B, DExplanation:
Exact Extract
“Session management; UE IP address allocation; User-plane function selection and control; UPF service control; QoS and policy execution; Downlink data arrival notification.”
— Huawei Training Material, Main Network Functions of the 5GC, page 95.
Technical Deep Dive
The 5G Session Management framework provides standardized procedures for establishing, modifying, and releasing PDU sessions. The principal procedures are PDU Session Establishment, PDU Session Modification, and PDU Session Release.
B. PDU Session Release: This procedure terminates an existing PDU session and releases the associated resources. The resources may include UE IP address assignments, QoS rules, PFCP session state, and access-network resources.
D. PDU Session Establishment: This procedure creates a new PDU session and establishes the required session context. It includes SMF selection, subscription verification, UPF selection, applicable policy control, and resource establishment.
Why A is incorrect: The standardized procedure is called PDU Session Modification, not PDU Session Update. Although session updating is an informal description of changing session state, it is not the formal 5GSM procedure name used in this context.
Why C is incorrect: 5G manages individual QoS flows within a PDU session. QoS flow establishment or modification can occur through the PDU Session Establishment or Modification procedures. A standalone procedure called Dedicated QoS Flow Activation is not one of the three principal standardized 5GSM procedures. The terminology more closely resembles LTE dedicated bearer activation.
3GPP TS 23.502 defines the establishment, modification, and release procedures, while TS 24.501 specifies the associated NAS session-management messages. Therefore, B and D are correct.
Which of the following is not a characteristic of network slices?
Options:
On-demand deployment
Shared or dedicated NFs
Control and user plane separation (CUPS)
E2E SLA assurance
Answer:
CExplanation:
Exact Extract — Network Slicing
“Network slicing enables operators to slice a network into multiple virtual networks on the same hardware infrastructure to allocate resources as required and flexibly combine capabilities. This technology enables different requirements of diverse services to be met. When new requirements are raised but the network cannot meet them, operators only need to virtualize a new slice to launch services quickly, without needing to deploy a new network.”
— Huawei Training Material, Differentiated 5G Service Requirements, page 21.
Technical Deep Dive
Network slicing allows an operator to create multiple logical networks over shared physical infrastructure. Each network slice can be designed for a particular service profile, customer group, or operational requirement.
A. On-demand deployment: Network functions and resources can be instantiated or scaled according to service requirements, enabling flexible network deployment.
B. Shared or dedicated NFs: Network slices may use dedicated network function instances, shared instances, or a combination of both. For example, different slices may share an AMF while using separate SMF and UPF instances to satisfy specific service requirements.
D. End-to-end SLA assurance: An end-to-end network slice may coordinate resources across the RAN, transport network, and core network to support particular service-level objectives. These can include throughput, latency, reliability, and isolation requirements.
C. Control and User Plane Separation: CUPS separates the network control-plane functions from user-plane packet processing. In 5G, the SMF controls session management and UPF selection, while the UPF forwards user traffic. CUPS supports flexible placement of these functions and can facilitate network slicing, but it is an architectural principle rather than a defining characteristic of network slicing.
A 5G system can implement CUPS without provisioning multiple logical network slices. Therefore, C is correct.
Which of the following NFs produces the session binding data that is stored on the BSF?
Options:
AF
BSF
SMF
PCF
Answer:
DExplanation:
Exact Extract
“All network functions on the control plane interact with each other through service-based interfaces. A service can be invoked by multiple network functions, reducing the coupling degree defined for interfaces between network functions.”
— Huawei Training Material, SBA Network Architecture, page 93.
Technical Deep Dive
The Binding Support Function (BSF) maintains binding information that allows network functions to locate the appropriate Policy Control Function (PCF) for a subscriber session. The PCF produces and registers the relevant binding information.
The operation is performed using the Nbsf_Management_Register service. A simplified registration procedure is: PCF sends Nbsf_Management_Register to BSF, and BSF returns a Registration Response.
The binding data can include the subscriber's IP address or other session-related identifiers, together with information identifying the responsible PCF. This mechanism is essential in networks containing multiple PCF instances.
For example, when an Application Function requires policy interaction for an existing PDU session, the BSF can help identify the PCF that manages that session.
The AF consumes policy services but does not normally register the PCF's session binding information. The BSF stores and manages binding records but is not the network function that originates the session's PCF binding. The SMF performs session management and exchanges policy information with the PCF, but the PCF registers its binding with the BSF.
3GPP TS 29.521 defines the Nbsf_Management_Register operation initiated by the PCF. Therefore, D is correct.