FCSS_NST_SE-7.4 FCSS - Network Security 7.4 Support Engineer Questions and Answers

The TCP port 445 is blocked between FortiGate and collector agent.

The collector agent preshared password is mismatched.

The FortiGate cannot resolve the active directory server name.

The FortiGate and the collector agent are using different TCP ports.

The local FortiGate has at least one interface that participates in a broadcast network.

The local FortiGate has at least one interface that participates in a point-to-point network.

The local FortiGate is the DR.

Neighbor 0.0.0.18 is the designated router (DR).

Perfect Forward Secrecy (PFS) is enabled in the configuration.

The local gateway IP address is 10.0.0.1.

It shows a phase 2 negotiation.

The initiator provided remote as its IPsec peer ID.

FortiGate allows the connection, based on the URL Filter configuration.

FortiGate blocks the connection as an invalid URL.

FortiGate exempts the connection, based on the Web Content Filter configuration.

FortiGate blocks the connection, based on the FortiGuard category based filter configuration.

PPP chooses from a group of parallel options lo identity the optimal path tor processing a packet.

Only FortiGate hardware configurations affect the path that a packet takes.

PPP does not apply to packets that are part of an already established session.

Software configuration has no impact on PPP.

The network type connecting the local Fortigate and OSPF neighbor 0.0.0.10 is point-to-point.

All neighbors are in area 0.0.0.0.

The local FortiGate is the BDR.

The local FortiGate is not a DROther.

The automation stitch test is not being logged.

The automation stitch test failed but the HA failover was successful.

An HA failover occurred.

The test was unsuccessful.

The local ForliGate has received one prefix from BGP neighbor 100.64.1.254.

The TCP connection with BGP neighbor 100.64.2.254 was successful.

The local FortiGate has received 18 packets from a BGP neighbor.

The local FortiGate is still calculating the prefixes received from BGP neighbor 100.64.2.264

The router 100.64.3.1 needs to update the local AS number in its BGP configuration in order to bring up the 8GP session with the local router.

An inbound route-map on local router is blocking the prefixes from neighbor 100.64.3.1.

All of the neighbors displayed are part of a single BGP configuration on the local router with the neighbor-range set to a value of 4.

The BGP session with peer 10.127.0.75 is up.

In the phase 1 proposal configuration, add AES256-SHA256 to the list of encryption algorithms.

In the phase 1 proposal configuration, add AESCBC-SHA2 to the list of encryption algorithms.

In the phase 1 network configuration, set the IKE version to 2.

In the phase 1 proposal configuration, add AES128-SHA128 to the list of encryption algorithms.

There are 98908 kB o! memory that will never be used.

The user space has 708880 kB of physical memory that is not used by the system.

The I/O cache, which has 641364 kB of memory allocated to it.

The value indicated next to the inactive heading represents the currently unused cache page.

SP Login dump

Authentication Response

Authentication Request

Assertion dump

The egress interface associated with static route 8.8.8.8/32 is administratively up.

The default static route through 10.200.1.254 is not in the forwarding information base.

The default static route through port2 is in the forwarding information base.

The BGP route to 10.0.4.0/24 is not in the forwarding information base.

FortiGate will drop the expected traffic if it does not arrive within 23 seconds.

Clearing the master session has no impact on the expectation session.

This is a pinhole session to allow traffic for a TCP protocol that dynamically assigns TCP ports.

The session is checked against firewall policy ID 25.

The heartbeat messages can be seen using the command diagnose debug authd fsso list.

The heartbeat messages can be seen in the collector agent logs.

The heartbeat messages can be seen on FortiGate using the real-lime FSSO debug.

The heartbeat messages must be manually enabled on FortiGate.

Return traffic to the initiator is sent to 10.1.0.1.

Return traffic to the initiator is sent lo 10.200.1.254.

It is an ICMP session from 10.1.10.10 to 10.200.1.1.

It is an ICMP session from 10.1.10.1 to 10.200.5.1.