D-MSS-DS-23 Dell Midrange Storage Solutions Design 2023 Questions and Answers

In a scenario where a customer needs to design a DR site with a 15-minute RPO using storage-based asynchronous replication, creating a single protection policy assigned to 30 volumes with a five-minute shift between each volume is the most stable design. This approach ensures that the replication load is evenly distributed over time, minimizing the impact on storage performance.

The maximum throughput per port in backend 12 Gb SAS (Serial Attached SCSI) ports in Dell Unity XT arrays is 2500 Mbps. SAS ports are used to connect storage devices and provide high-speed data transfer capabilities:

12 Gb SAS Standard:The 12 Gb SAS standard supports high data transfer rates, making it suitable for enterprise storage systems that require robust performance and reliability.

Performance Metrics:Each 12 Gb SAS port can achieve up to 2500 Mbps, which translates to approximately 2.5 Gbps of throughput, supporting high-performance storage operations.

CloudIQ is a cloud-based application that provides frequent, dynamic, and nondisruptive content updates to users. It offers proactive monitoring, predictive analytics, and detailed health scores for Dell storage environments, including PowerStore and Unity systems. CloudIQ helps users maintain optimal system performance by delivering real-time insights and alerts about potential issues before they impact operations. Here’s how CloudIQ benefits users:

Frequent Updates:CloudIQ continuously gathers and analyzes data from connected systems, providing up-to-date information and insights.

Dynamic Content:The tool dynamically adapts to changing conditions in the storage environment, offering relevant recommendations and updates.

Nondisruptive:All updates and insights provided by CloudIQ are nondisruptive, ensuring that there is no interruption to the system’s operations.

Dell provides several tools for monitoring and managing Unity environments, each with specific capabilities for performance analysis, anomaly detection, and proactive maintenance.

CloudIQ:

CloudIQ is a cloud-based application that offers proactive monitoring and anomaly detection for Dell storage environments, including Unity.

It leverages advanced analytics and machine learning to provide insights into system health, performance trends, and potential issues before they impact operations.

Other Tools:

InsightIQ: Primarily used for monitoring Isilon and PowerScale systems, not Unity.

Unisphere: Provides management and monitoring for Unity but lacks the advanced anomaly detection capabilities of CloudIQ.

ArrayconfigAnalyzer: Used for specific configuration analysis and not for continuous proactive monitoring.

Dell Midrange Storage References:

Dell Unity XT documentation and CloudIQ guides provide comprehensive details on the capabilities and benefits of using CloudIQ for proactive monitoring.

Community forums and support resources from Dell Technologies offer additional insights and user experiences.

According to Dell PowerStore documentation (PowerStore OS 2.0+):

A Base Volume Family logically groups:

Original volume (source)

Snapshots (point-in-time copies)

Thin clones (writable snapshots)

Replication targets (synchronized copies for disaster recovery)

This unified structure simplifies management and ensures data consistency across all derived volumes.

 Source: Dell PowerStore Administration Guide (Section: Volume Families, Page 97).

When designing a Metro Volume, placing the witness at a third site is crucial to avoid unnecessary storage and compute resource usage. The witness helps in maintaining quorum and ensuring the consistency of the Metro Volume in case of a site failure. Here’s how it works:

Witness at Third Site:Placing the witness at a separate, third site ensures that it can independently verify the status of the primary and secondary sites, maintaining high availability and failover capabilities without consuming significant resources.

Avoids Resource Usage:By offloading the witness function to a third site, the primary and secondary sites can focus their resources on storage and compute tasks without the overhead of managing quorum.

Recovery Point ObjectiveWhen you set up an asynchronous replication session, you can configure automatic synchronization based on the RPO. You can specify an RPO from a minimum of 5 minutes up to a maximum of 1440 minutes (24 htours).

=================

During normal operation, a promotion to FAST Cache is initiated after the Policy Engine determines that 64 KB block of data is being accessed frequently. For consideration, the 64 KB block of data must have been accessed by reads and/or writes multiple times within a short amount of time.

For a customer preparing for a data center maintenance window and wanting to test their disaster recovery plan, the recommended PowerStore Manager replication option is a planned failover from the source site. This process involves initiating the failover from the source site, ensuring a controlled transition of applications and services to the disaster recovery site. Planned failover allows for testing the disaster recovery plan while maintaining data integrity. Reference:Dell PowerStore Replication Best Practices

=================

Understanding the Calculation Context:In PowerStore, capacity planning for virtualized environments involves forecasting storage requirements based on VM deployments. The formula VM count × Capacity per VM is specifically used to model projected storage consumption before applying efficiency factors.

PowerStore's Capacity Terminology:

Raw Capacity: The total physical capacity of installed drives before accounting for RAID overhead, system metadata, or formatting.

Usable Capacity: The available storage after subtracting RAID overhead, system partitions, and metadata. Represents the logical space presented to the user before data reduction.

Effective Capacity: The logical storage capacity available to applications after accounting for data reduction technologies (deduplication, compression), thin provisioning, and system efficiency. It represents the "logical" data stored per physical byte.

Why "VM count × Capacity per VM" Equals Effective Capacity:

Capacity per VM typically refers to the provisioned (logical) storage allocated to each VM (e.g., a 500GB virtual disk).

Multiplying this by the VM count gives the total logical capacity required by all VMs.

PowerStore uses this product to calculate the "Effective Capacity" requirement. This is the logical capacity the system must support after data reduction efficiencies are applied. It represents the total amount of data the VMs will logically store, which the physical storage (Usable/Raw Capacity) must ultimately hold after deduplication/compression.

Official Dell PowerStore Documentation:The Dell PowerStore: Deployment Planning and Best Practices Guide explicitly defines this calculation:

"Effective Capacity is calculated as: Number of VMs × Average Capacity per VM."

(Source: Dell PowerStore Deployment Planning and Best Practices Guide, Section: Sizing Considerations for Virtualized Environments)

This guide further clarifies that Effective Capacity is the key metric for sizing PowerStore systems in virtualized scenarios, as it represents the logical workload demand the system must satisfy, leveraging its data reduction capabilities to fit onto the physical Usable Capacity.

Conclusion:

Multiplying VM count by Capacity per VM directly yields the Effective Capacity requirement. This represents the logical storage demand placed on the PowerStore system. The physical Usable Capacity must be sufficient to hold this Effective Capacity after data reduction savings are applied. Raw Capacity is unrelated to VM provisioning calculations.

Key References:

Dell PowerStore: Deployment Planning and Best Practices Guide (Current Version) - Definitive source linking VM count × Capacity per VM to Effective Capacity.

Dell PowerStore: Introduction Guide - Explains core concepts of Raw, Usable, and Effective Capacity.

=================

Adding 6 x 3840 GB NVMe SSD drives is the most cost-effective way to expand the capacity of a PowerStore 3200T system. This addition provides a significant increase in both raw and usable capacity, offering a better balance of performance and cost compared to smaller or more expensive drive options.

Dell recommends disabling DelayedACK when configuring ESXi hosts using iSCSI to connect to PowerStore systems. DelayedACK can cause performance degradation and connectivity issues in iSCSI environments. By disabling DelayedACK, the communication between the ESXi host and the PowerStore array becomes more efficient, leading to better performance and reliability.

SAS Flash 2 drives can be used in a FAST Cache pool configuration for Dell Unity XT solutions. FAST Cache (Fully Automated Storage Tiering Cache) allows frequently accessed data to be moved to high-performance SSDs, improving overall system performance. SAS Flash 2 drives are suitable for this purpose, providing a balance of performance, endurance, and cost. Reference:Dell Unity XT FAST Cache Overview

=================

Dynamic Pool Configuration with RAID 5:

RAID 5 (4+1) protection involves 4 data drives and 1 parity drive.

Minimum Drive Count:

For creating a dynamic pool with RAID 5 (4+1), the configuration must include at least 2 RAID 5 (4+1) groups to ensure redundancy and performance.

The minimum drive count for this setup would be 2 * (4 + 1) + 1 (hot spare) = 11 drives.

RAID 5 Requirements:

This configuration ensures that the dynamic pool has enough drives to maintain performance and data protection according to Dell’s best practices.

Dell Midrange Storage References:

Dell Unity XT documentation provides detailed guidelines on RAID configurations and the minimum drive requirements for dynamic pools.

Community forums and support resources from Dell Technologies offer insights into best practices for configuring RAID and dynamic pools.

Sizer Tool Paths:

The Dell Unity XT sizer tool offers multiple paths for configuring storage solutions, each tailored to different user needs and expertise levels.

Quick Configuration:

The Quick Configuration path uses predefined configurations based on array model, capacity points, random workloads, RAID type, and drive type.

This path simplifies the sizing process by providing users with recommended configurations that align with common use cases and performance requirements.

Other Paths:

Advanced Performance: Allows for detailed customization of performance parameters.

Simple Performance: Focuses on basic performance metrics without predefined configurations.

System Designer: Provides comprehensive design options for complex scenarios.

Dell Midrange Storage References:

Dell Unity XT documentation provides detailed guidelines on using the sizer tool and the different configuration paths available.

Additional resources from Dell Technologies' support and community forums offer insights into best practices for using the sizer tool.

Dell PowerStore supports media devices that carry a FIPS Type D certification to ensure data security and compliance with Federal Information Processing Standards (FIPS). The certified media devices include:

SAS SSD:Serial Attached SCSI (SAS) Solid State Drives are commonly used in enterprise storage solutions for their reliability and performance.

NVMe SSD:Non-Volatile Memory Express (NVMe) Solid State Drives offer high-speed storage access and are optimized for performance.

NVMe SCM:NVMe Storage Class Memory provides a new tier of storage that bridges the gap between DRAM and traditional SSDs, offering both speed and persistence.

NVRAM:Non-Volatile Random Access Memory combines the speed of RAM with the persistence of flash storage, ensuring data is retained even after power loss.

These devices are FIPS Type D certified, ensuring they meet stringent security standards for data protection.

The tool that a Solution Architect must use to check the compatibility of a new storage solution with an existing infrastructure is E-Lab Navigator. E-Lab Navigator is a comprehensive online database provided by Dell that includes compatibility information for various hardware and software configurations. It helps ensure that new storage solutions are compatible with existing infrastructure, reducing the risk of integration issues. Reference:Dell E-Lab Navigator Overview

=================

The Dell Unity XT 380F array is equipped with converged network adapter (CNA) ports, while the Dell Unity XT 880F array features embedded mezzanine ports. These differences in port configurations reflect the varied performance and connectivity options available in different models of the Unity XT series.

When sizing a new Dell Unity XT array that requires hybrid dynamic pools, the "Quick Configuration" option must be selected in the Midrange Sizer. This option streamlines the configuration process, allowing for a balanced and efficient setup of hybrid pools. Here’s why Quick Configuration is used:

Simplifies Setup:Quick Configuration provides a straightforward approach to setting up the array, ensuring that the necessary parameters for hybrid dynamic pools are configured correctly without requiring in-depth manual input.

Balanced Performance:The tool uses predefined settings and best practices to create a hybrid pool that balances performance and capacity, making it ideal for a variety of workloads.

SAS Flash 3 drives(also known asRead-Intensive (RI)SSDs in Dell Unity XT environments) are typically rated at3 Drive Writes Per Day (DWPD).

✅What does 3 DWPD mean?

It means that these drives are designed to safely handle writingthree times their entire capacity every dayover their warranty period (usually 5 years).

For example, a 1TB SAS Flash 3 drive can handle up to3TB of writes per daywithout exceeding its endurance specification.

✅Why is this important?

The DWPD metric is a crucial factor in determining whether a drive’s endurance matches the expected workload.

3 DWPDstrikes a balance betweenenduranceandcostin most general-purpose storage workloads.

✅Where is this documented?

TheDell EMC Unity XT Best Practices Guideand theDell EMC Unity XT Drive Specification Guidedetail the DWPD ratings for different flash drive types, including SAS Flash 3 drives.

Dell’s documentation confirms that SAS Flash 3 drives (RI SSDs) are rated at3 DWPD.