CDCS-001 Certified Data Centre Specialist (CDCS) Questions and Answers

An air mounted system is often used to cool small IT environments. This type of cooling system is typically mounted on the wall or ceiling and works by blowing cool air into the room to lower the temperature. Air mounted systems are compact, easy to install and maintain, and can be a cost-effective solution for small spaces.

The best option for enclosing many electrical devices in proximity, especially with audio, video and computers, is Power Distribution Units (PDUs). PDUs are designed to provide power to multiple devices using a single power source, such as a wall outlet or a generator, while providing protection against power surges. PDUs are generally equipped with multiple outlets to allow for a variety of electrical devices to be connected and powered simultaneously.

A voltage regulator controls the voltage produced at the output of the alternator. It's a device that maintains the output voltage of an alternating current (AC) power source within a safe range. The voltage regulator compares the actual output voltage to the desired voltage level and adjusts the voltage accordingly.

Voltage Meter, Voltage Stabilizer, and Voltage Backup Device are not devices that control the voltage produced at the output of the alternator. They are different types of equipment and have different functions.

A voltage meter is a device used to measure the voltage in an electrical circuit. A voltage stabilizer is an electronic device that maintains a constant voltage level. A voltage backup device is a device that provides temporary backup power in case of an electrical outage.

Standby power, also known as backup power, is a type of power that can be a source available to the data center that takes over the function of supplying when utility power is unavailable. Standby power systems are designed to provide power to critical loads in the event of a power outage, and can include generators, uninterruptible power supplies (UPS), and batteries. Standby power systems can be used to provide power to the data center for a short period of time, such as a few hours or days, until utility power is restored.

Passive, Active and Alternate are not specific type of power sources used in data center. They are terms used in different context and have different meaning.

Human error is a major cause of data center downtime. Human mistakes are one of the top causes of data center outages, accounting for around one-third of all downtime incidents. Common causes of human error in data centers include misconfiguration, inadequate maintenance, and improper security practices. To reduce the risk of human error, it is important to ensure that data center staff receive proper training, have adequate access control measures in place, and are familiar with best practices for data center operations.

Ohm (Ω) describes the amount of resistance electricity encounters. It is one of the base units of the International System of Units (SI), and is defined as the amount of resistance that a conductor has when a force of one volt is applied across it. Ohms are used to measure the electrical resistance of a circuit, and can be used to determine the power of a circuit or the amount of current flowing through it.

A circuit breaker is a device that protects electrical equipment from damage caused by overload or short circuit. It does this by automatically disconnecting the power supply when it detects a surge or drop in voltage, preventing the equipment from being damaged.

 Whenever electrical power is being consumed in an IT room or data center, heat is generated. This heat must be removed in order to maintain an optimal temperature for the equipment, and this is usually done through cooling systems such as air conditioning, air economization, liquid cooling, evaporative cooling, and immersion cooling.

A grounded wire is connected to metal appliance cases in order to provide a safe path for electricity to flow in the event of a short circuit or other electrical problem. This helps to protect the appliance and the people using it from potential electrical shocks, and it also helps prevent fires and other accidents.